The Best High-Pressure Shower Heads You Should Buy Right Now

Few things can feel as dissatisfying as trying to take a shower with low water pressure. This can leave you feeling as though you’re not really rinsed off and at the very least can extend not only the amount of water that you use, but the length of your shower.

There are many reasons why the water pressure in your shower might not be functioning at full capacity. First, it could be an issue with your plumbing or pipes. In other cases, this can happen as a result of buildup in your shower head itself. However, it’s also possible that you simply don’t have a shower head that’s pressurized enough.

Some people intentionally select low-pressure shower heads for their bathrooms, as it can give a more relaxing experience. However, a shower head that’s lower pressure by design is not the same thing as one that’s low pressure because of buildup or blockage, and the same applies to a high-pressure shower head.

Here’s everything you need to know if you want to invest in a high-pressure shower head.

The Benefits Of A High-Pressure Shower Head 

There are many benefits to a high-pressure shower head. Some are personal preference, and others have to do with timeliness and efficiency.

Higher pressure means it’s easier to get clean.

Simply enough, more water coming forth at rapid rates means that you’re able to clean yourself more quickly and efficiently.

Higher pressure can also exfoliate the skin.

For those who enjoy high-pressure water, it can add an exfoliating feature to your normal shower routine.

It can be relaxing.

Some people enjoy the sensation of being squeezed or having weight on them (think of the relaxing properties of a weighted blanket, for example) and apply the same concept to a highly pressurized shower. In this case, the torrents of water can force muscles to relax, similar to how a massage jet in a tub would.

The Downsides To A High-Pressure Shower Head

Of course, with pros come inevitable cons. Here are some of the main issues you should consider as you consider your high-pressure shower head.

Your current shower head may not be the issue.

It’s possible that you’re dissatisfied with your current water pressure not because it’s actually underperforming but because it’s clogged or something’s wrong with the plumbing. This suggests a deeper issue, because if there’s something wrong beneath the surface, merely changing the head won’t fix it.

Some find it uncomfortable.

Though you might enjoy an intense morning shower, others might find the high-pressure water too intense, especially those who are sensitive, dealing with illness or injury, or small children. In this case, you might want to look into shower heads with adjustable settings or pressures to suit the needs of everyone in the home.

It requires more water to function.

Naturally, a high-pressure shower head is going to require significantly more water flow to function. This means that long-term, you might pay more for your water bill, potentially heighten the cost of your municipality’s water as a whole (water is sourced by community averages), and it can be less eco-friendly in the end.

What Is An Acceptably High Shower Pressure?

Experts say that a number of years ago, shower heads delivered roughly five to eight gallons of water per minute. However, the current standard is a shower head that dispenses 2.5 gallons of water each minute, and a low-pressure shower head would deliver about two gallons each minute. 

If you’re unsure how your current fixture is functioning, put a one-gallon container beneath the nozzle and put the water on for one minute, timed. If the gallon is filled up completely within about 24 to 32 seconds, your shower head is releasing at low flow. However, if it takes 15 seconds to fill, your rate is about four GPM, and if it takes 10 seconds, your rate is about six GPM. 

For a high-pressure shower, you need to make sure that your water flow is still beneath 2.5 gallons per minute in accordance with federal laws. These regulations are in place to ensure that water is not being wasted. 

Why Does Water Conservation Matter?

Water conservation is important because though there is an abundance of salt water on the planet, to make it consumable it must go through a rigorous process of filtering and desalination. Therefore, the water that we use in our everyday lives is limited and requires a lot of resources to get to our faucets.

This is why there are some regulations in terms of how much water you can and cannot be using in your shower each day. However, this isn’t an issue you should anticipate dealing with, considering that any high-pressure shower head you purchase off the market should be in accordance with regulations and performing at an acceptable, if not optimal, rate.

Taking your own measurements only becomes necessary if and when you are concerned that your preexisting shower head is not functioning as it should. 

You will need to check in on your state or district’s regulations regarding residential water use. This is particularly true if you live in a state or area that is prone to drought, and requires water conservation. 

How To Measure Water Pressure

To get the most technically efficient measurement of whether or not your water pressure is low, average, or high, you will want to measure the water’s PSI, or pounds per square inch. To do this, you can either use a pressure gauge, which you can buy at most home improvement stores, or you can hire a plumber to come out and test it for you.

Normal water pressure will generally measure between 40 and 60 PSI. However, most homeowners prefer something right in the middle of that, ranging in the 50s. Low water pressure is in the 30s, and high is above 60. 

It’s important to measure your water pressure regardless of whether or not you want to change your shower head or gauge the efficiency of your home’s usage. This is because changes in water pressure can signal serious problems with your plumbing, which you’ll want to address sooner rather than later. 

If you want to get a rough estimate of how your water pressure is functioning in your shower but don’t have the time or resources to get a pressure gauge or a professional, there’s one other trick you might want to try. Place a one-gallon container beneath the nozzle and put the water on for one minute, timed. If the gallon is filled up completely within about 24-32 seconds, your shower head is releasing at low flow. However, if it takes 15 seconds to fill, your rate is about four GPM, and if it takes 10 seconds, your rate is about six GPM. This would mean that your water pressure is running normally, or high. 

How Some Shower Heads Increase Pressure While Retaining Water Use 

There is a way to still get that intense showering experience you desire, but not increase your water bill, and still stay as eco-friendly as possible. Brands like Moen and Delta offer shower heads that are actually designed to make you feel as though you are using more water than you are. This is how to determine whether or not a shower head will be pressurized enough for you, particularly if it is not labelled as “high” pressure.

Many people utilize high pressure shower heads to actually increase their water pressure from a low-flow situation. This means that the shower head they desire actually gives them a more normal or average water output. Be this as it is, high pressurization is also available, but you should look at a few key features to determine whether or not it will suit your needs.

Pressure Design

Does the shower head have adjustable settings, or a pressure chamber? Looking into the product’s details will help you determine whether or not you can adjust the pressure and output, which is most desirable for those whose showers are used by multiple people..

Wide Shower Head

Instead of just increasing the pressure, you might want to actually widen the breadth of your shower’s water flow. A narrow shower head might give you the feeling of being low flow, but actually be outputting just fine. A wider shower head, on the other hand, can give you that high pressure feeling without actually using more water.

Water Flow Rate

You don’t need to find a shower head that emits the maximum gallons/minute that’s legally allowed to get the high pressure experience you desire. In fact, you can try instead removing the flow restrictor on a shower head, or adjusting it, if available.

Quality

Ultimately, a high-quality shower head should give you the exact water pressure you desire. Trusted brands like Moen and Delta offer many different models with specialty features to make your showering experience all that it can be. Sometimes, you might not be looking for a high shower pressure necessarily, rather, just a more efficient one.

Our Favorite High-Pressure Shower Heads To Choose From:

Moen 23026 Adler 3.5-Inch 4-Function Showerhead, Chrome

With its smooth curves and minimalist aesthetics, the Adler collection suites a variety of decor preferences.

Buy on Amazon

This shower head has four spouts that are concentrated at the center of the head, and each is pretty large, giving a targeted and intense water flow. This option also has a feature to adjust the flow, meaning that you can take a high-pressure shower and then lower the pressure if someone else is using it next.

Delta Faucet 4-Spray In2ition 2-in-1 Dual Hand Held Shower Head with Hose, Stainless 58467-SS

Wash the day away with this In2ition 2-in-One 4-Spray Hand Shower/Shower Head in Stainless. Use the integrated shower heads together or separately to get water where you need it most. With four (4) different settings, plus a pause feature, this hand shower has you covered from top to bottom, or bottom to top.

Buy on Amazon

This shower head is both aesthetically beautiful and great for your budget. With a classic build, you should have no issue installing it where your current shower head currently is, and with a brushed finish, it’s a standout piece for your bathroom.

Some people simply prefer to take a shower under a high-pressure water flow, as it is soothing, makes the shower faster, and can even make you feel as though you are cleaner than you would be otherwise. When deciding on a new shower head, take into consideration water conservation and your state’s water regulations. 

About the author
My name is Patrick, I build things, I am a human but I am also a robot. Gliese 581-G is my home town. I assist with product, technology, and business strategy at Thought Catalog and Collective World. Follow Patrick on Instagram or read more articles from Patrick on Thought Catalog.

Learn more about Thought Catalog and our writers on our about page.

Related